← Back to Blog
How to Apply DHS Hurricane 3 Rubber: Step-by-Step Guide
| EN
How to Apply DHS Hurricane 3 Rubber: Step-by-Step Guide
How to properly apply DHS Hurricane 3 rubber to your blade.
What You Need
- DHS Hurricane 3 rubber
- Table tennis glue (booster)
- Brush
- Clean work surface
Step-by-Step
- Preparation: Clean blade and rubber
- Apply glue: Thin layer on blade
- Dry: Wait 5-10 minutes
- Second coat: Glue on rubber back
- Dry: Another 5-10 minutes
- Apply: Carefully place rubber
- Press: Stroke from center to edges
- Cut: Trim with scissors or cutter
Tips
- Don't use too much glue
- Always stroke from center to edges (avoid bubbles)
- Allow enough drying time
- Be extra careful in humid weather
Common Mistakes
- ❌ Too little glue
- ❌ Too much glue
- ❌ Apply too quickly (glue still wet)
- ❌ Not pressing properly (air bubbles)
Booster Recommendation
For best performance, we recommend DHS's own booster or professional alternatives.
Order Hurricane 3 now →